Railroad Roofing & Maintenance has been installing asphalt shingle roofs across Railroad for 17 years. GAF Timberline HDZ, Owens Corning Duration, CertainTeed Landmark — we carry the top shingle lines and we're certified by the manufacturers to install them.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Consultation & Inspection
Free on-site inspection. We measure, assess your roof deck condition, and walk you through architectural vs. three-tab shingles with realistic pricing. No pressure, just facts.
Tear-Off & Deck Prep
Full tear-off to the deck. Old shingles, deteriorated felt, and corroded flashing removed and hauled to the dumpster. Deck inspection catches hidden damage — rotted sheathing, water-stained OSB, nail pops — before it's buried under new shingles.
Underlayment & Flashing
Ice-and-water shield bonded at valleys and eave lines. Synthetic underlayment over the full deck. New aluminum drip edge at every eave and rake. All flashing — chimney, pipe, vent, wall — sealed and secured before a single shingle goes down.
Shingle Installation
Field shingles installed with proper exposure and overlap. Nailed per manufacturer specs — 4 nails standard, 6 in high-wind zones. Starter strips at the eave prevent wind uplift. Ridge cap shingles finish every peak with integrated ridge vent for ventilation.
What Railroad Customers Say
"Our neighbors recommended them and now we understand why. Meticulous attention to detail and they treated our home like it was their own."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
Why Choose Railroad Roofing & Maintenance for Shingle Roofing?
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.